REVEALAI ANALYTICS TOOL SAVES POWER COST BY 10%
You can now precisely identify how, when, and where the energy is being consumed and how best to implement energy saving measures.
- Reduced Energy Bill
- Increased Energy Efficiency
- Reduced OpEx
- Quicker ROI
- Reduced Carbon Foot Prints
- Enables Statutory Compliance
Features
Energy Metering & Accounting
Advanced Metering Infrastructure (AMI) takes greater control over energy costs and provides reliable energy supply for consumers. Our solution facilitates effective digitization & visualization with granular asset-level energy data starting from building-level, floor-level, etc. (or building-wise, floor-wise etc.). In addition, it also helps you in efficient billing and energy planning.
Power Quality Monitoring
Power quality issues are not always easy to spot but they do affect multiple aspects of your business. Poor power quality may reduce efficiency, cause higher energy costs, and expensive asset downtime. It also spells higher costs due to penalties. Our solution helps you to identify power quality problems like harmonics, voltage sags, swells, etc. Gaining intelligence and control will help you to reduce downtime, extend asset lifetime, lower costs, and improve energy efficiency.
Demand Monitoring & Control
Collection & processing the energy consumption data allows the calculation of demand and peak demand for individual assets and the entire facility. Our solution allows you to continuously monitor the demand loads of your facility. By closely monitoring your demand levels, and alerting on pre-set thresholds, you can greatly reduce the chances of incurring costly critical peak charges from your power provider which helps you to lower your monthly demand bills.
Fault Management
Triggers timely alerts and prompts in case of abnormalities or critical issues via automated SMS or mail for escalations. It precisely detects faults and segregates it as major and minor issues for O&M.
White-Labeled Dashboard
Personalized energy analytics dashboard with your logo, colours, custom URL, branded reports and email notifications.
Advanced Analytics
Our solution provides transparent insights into the critical energy parameters such as power interruption patterns, voltage & frequency trends, PF, etc. Analytics adds intelligence to this data making it decision-able, enabling real-time alerting, predictive maintenance, automate optimization, etc.
Smart Reporting
An automated hourly/daily/monthly customizable report on energy usage and consumption helps you to remotely identify & proactively assess issues to reduce maintenance costs and extend asset life.
Policy & Standards Compliance (Optional)
Our solution helps enable compliance with different energy management regulations like ISO 50001.
Device Management
A unified console for device management enables you to configure, monitor, and manage hundreds of sensors and gateways located at different geo-locations seamlessly.
Wireless Energy Management
Available down to sub-circuit and socket level, our solution provides metering solutions for both main and sub-meters. Wireless metering can be done implementations using industry standard protocols such as GSM, ModBus, ZigBee, DLMS etc.
Machine-Learning Analytics
A unified console for device management enables you to configure, monitor, and manage hundreds of sensors and gateways located at different geo-locations seamlessly.
Variable frequency drive is used for critical application & flow control. There are several reasons to monitor a critical VFD as below
Features
- It gives a timestamp list of control & monitoring parameters at the time of fault.
- These real-time parameters such as Voltage, current, frequency, speed (RPM), Rated output (KW), Torque, Temperature etc.
- Along with these VFD can be remotely switched ON/OFF, speed controlled with secured login access.
- Remote analytics can be done using the web application
Wireless vibration sensor enables easy condition monitoring of rotary assets and detects fault before failure occurs. The super-compact vibration sensor provides reliable data for continuous monitoring and remote diagnostics. This sensor data directly connects with the gateway in both wired and wireless modes. The REVNET platform enables multichannel data acquisition for simultaneous monitoring of various nodes. The data visualization can be done both in web and app as well.
- Increase the Machine Life Time- Proper diagnosis enhances the machine efficiency and longevity
- Risk-free Environment- Remote monitoring helps the safety of each employee inside a hazardous arc area
- Data shows 30% Reduction in Maintenance Cost- Predictive as well as preventive detection of the fault lead to decrease the OPEX.
- 20% Reduction in Unplanned Downtime- Machine downtime decreases in order to enhance the overall efficiency of the system.
- Single platform with multiple sensor nodes & Gateway protocol
- Customize Report ensures the current health status of the asset.
- Alert Management System- It identifies the anomalies in the system and send the message either in SMS or Mail to pre-defined user
FFT Analysis
Smartly analyze the spectrum of frequency to manually identify problem areas
Automated Diagnostics
Cloud-based and automated analysis of vibration data to give you final insights to act upon
Vibration Body of Knowledge
The software is matured by blank slate approach with an option of human in the loop, accounting to faster self-learning system.
Failure Prediction
From the time series data of vibration velocity we predict the probable time of failure using our AI-powered algorithm giving useful insights on the residual life of the assets.
Basically, the data can be captured from multi-vendor PLC through edge Gateway by using either Profibus /profinet or Modbus protocol. Once the data is being received then it is directly integrated into the cloud platform. So the user can get real-time data as well as analytics on the web or mobile App. By integrated single dashboard the user can easily trace the overall system health
Wireless temperature sensor designed for actively measure the temperature of the strategically important points on metal or insulating surfaces of current carrying parts. The sensors measure the temperature in wide range, from -40°C to 125°C and transmit packets every 30 seconds. The receiver receives the RF signals from multi sensors in range of 100 feet’s with temperature, battery status. Sensor is installed in the control panel and can receive information from sensors. Depending on number of Sensors in the system and the size of facility, gateway with inbuilt controller is installed over it. REVNET IoT platform showcase the sensor information from Modbus and records it into a textual log file to display alerts, trend charts and to generate reports. Admin User can set Alerts or generate reports.
Wireless Bus bar Temperature Monitoring System (WBTMS) is an intelligent system that we developed after many years of research and practical application. High-medium-low electrical system in range of (0.4-110KV) and electrical equipment that generates high temperature can use this solution. It integrates online temperature measurement, data collection, data analysis and control function. With this complete solution, it can help prevent many accidents by controlling the circuit breaker due to rise in temperature, eliminating potential safety hazard.
Features
- Wireless 2.4 GHz
- Modbus RS 485 Compatibility
- Battery backup to 5 years
- Withstand temperature up to 125 degree Celsius
- 2 ACB Cutoff relay
- Hooter
- Data logger
- Plug & Play System
Specifications
| BUS BAR MONITOR & CONTROLLER | |
|---|---|
|
Model |
Bus Bar Controller |
|
Type |
Spread Spectrum Tech. with 9-27 sensor’s communication |
|
Frequency |
2.4 GHz IEEE802.15.4 |
|
Alarm Mode |
Buzzer, Relay for Hooter and Relay for Circuit Breaker |
|
Data log |
Max temperature in day |
|
Minimum Reception Range |
Omni directional 300fts line of sight, Range reduce by obstructions |
|
Mounting Location |
Panel Mount |
|
Operating Temperature |
-28°C to 85°C (-18°F to 185°F) |
|
Physical Dimensions |
96mmx96mmx72mm |
|
Weight |
500 grams |
| BUS BAR SENSORS | |
|---|---|
|
Model |
Bus Bar Sensor |
|
Type |
Sensor & RF Transmitter |
|
Enclosure |
Non-conductive Silicon strap can withstand up to 300°C |
|
Operating Temperature |
-40°C to 125°C |
|
Transmission Frequency |
Every 30 Sec – 300 Sec* |
|
Minimum Reception Range |
50-100 ft. (sensors installed in control panel or switch gears) |
|
Mounting Location |
Panel Mount |
|
Battery |
3V/800mA Industrial High temperature Industrial Lithium battery that lasts up to 5 years. |
|
Mounting Location |
On flat clean surface |
|
Dimensions |
45mmx45mmx20mm*350mm |
|
Weight |
30 grams |
|
Installation |
can be installed anywhere on stationary or rotatory object by just strapping, so low breakdown installation time |
